Description
Product Description of Fully Synthetic Mobil 1 0W-30
Fully Synthetic
Grade: 0W-30
API Grade: SQ/ILSAC-GF 7A
Type of engine: Petrol
Mobil 1 Advanced Fuel Economy full-synthetic motor oil 0W-30 is low-viscosity to help improve fuel economy.
Utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness.
Helps protect critical engine parts for up to 10,000 miles between oil changes, controlling oxidation to prevent oil breakdown and maintaining excellent viscosity.
Meets ILSAC-GF 7A standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean.
Helps extend engine life by working to prevent damaging deposits and sludge buildup.
Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -40 degrees F).
Mobil 1 0W-30 is recommended by ExxonMobil for all types of modern gasoline-powered vehicles, including high-performance turbocharged, supercharged, multi-valve fuel injected engines found in passenger cars, SUVs, light vans and light trucks.
- Mobil 1 0W-30 is recommended by ExxonMobil for SAE 0W-30, 5W-30 and 10W-30 applications.
- Mobil 1 0W-30 is recommended by ExxonMobil for extreme cold conditions to help deliver quick starts and fast lubrication.
- Mobil 1 0W-30 is not recommended for 2-Cycle or aviation engines, unless specifically approved by the manufacturer.
Always check your owner’s manual for the manufacturer’s recommended oil viscosity grade, API service classification and any builder approval.
| This product has the following approvals: |
| GM Dexos1 Gen3 |
| This product is recommended for use in applications requiring: |
| FORD WSS-M2C953-A |
| Ford |
| This product meets or exceeds the requirements of: |
| ILSAC GF-6A |
| FORD WSS-M2C963-A1 |
| API SJ |
| API SL |
| API SM |
| API SN |
| API SN PLUS |
| API SN PLUS RESOURCE CONSERVING |
| API SN Resource Conserving |
| API SP |
| API SP Resource Conserving |
| Property | |
| Grade | SAE 0W-30 |
| Pour Point, °C, ASTM D97 | -54 |
| Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 | 10.3 |
| Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 | 56 |
| Flash Point, Cleveland Open Cup, °C, ASTM D92 | 227 |
| Density @ 15.6 C, g/ml, ASTM D4052 | 0.8424 |













Reviews
There are no reviews yet.